About d2id

This author has not yet filled in any details.
So far d2id has created 10 blog entries.

IMPORTANT UPDATE regarding Series E nD=1.550

IMPORTANT UPDATE - Series E nD=1.550 can spontaneously polymerize, causing the liquid to look cloudy and eventually this will cause the liquid to begin gelling.  This process is irreversible, but it can be prevented/slowed by storing the liquid at temperatures between 4 - 6oC.  If the liquid freezes it must be allowed to thaw at [...]

By |2019-06-05T15:38:20+01:00June 5th, 2019|Blog|0 Comments

Certificate of Assurance

If you need a Certificate of Assurance for your refractive index liquids as part of your quality management procedures then please just add one with your order under certificates in our shop.

By |2020-08-18T16:26:44+01:00December 18th, 2017|Blog|0 Comments

How do you check that your refractive index liquid is still ok to use and has not been contaminated?

The suspect bottle is well shaken and three test slides made up without asbestos present. If asbestos fibres are observed using dispersion staining, crossed polars or first order red plate examination, then the liquid is disposed of. We recommend that the liquids are checked for contamination on a monthly basis by performing this test using [...]

By |2018-09-27T15:25:49+01:00December 18th, 2017|Blog|0 Comments

Are you setting up a new asbestos laboratory?

When setting up a laboratory for the analysis of samples suspected of containing asbestos fibres there is a wide range of equipment required, some of which can be supplied by McCrone UK Limited. During the examination of a bulk sample using a stereo microscope fibres may be seen which are then collected and mounted in [...]

By |2018-09-27T15:25:49+01:00May 19th, 2017|Blog|0 Comments
Go to Top